Irrigation system installation

Familiarize yourself with the installation of the GRAAS iRigator automatic watering system

GRAAS iRigator automatic watering system is very easy to install and can be done by anyone.


When purchasing GRAAS iRigator, one of the two versions of the device is chosen - GSM or WI-FI. The WIFI version is used at home with a good and stable WIFI internet connection in the greenhouse. The GSM version is used in greenhouses without WI-FI access. The GSM version is often used in country gardens or private houses when the WI-FI signal in the greenhouse is too weak to ensure stable operation of the system. GRAAS always recommends choosing the GSM version.

GRAAS iRigator GSM

    The GSM version is used in greenhouses where there is no WI-FI signal or it is very poor. The GSM version requires a WorldWide plan, its usual price is 4.90€/month, but with the purchase of the irrigation system you now get a WorldWide plan subscription for a year for free!


    After unpacking the product, you must perform the following steps in the order indicated:


    1. Hang the device.

    2. Lay out the water hoses for each zone.

    3. Punch holes in the main zone hose and connect thin hoses to each plant stem.

    4. Close the hoses on the water outlets of the device.

    5. Connect the power cable and turn on the device (The device turns on immediately, only connected to the network).

    6. Wait about 1 minute for the device to connect to the server.

    7. Open the GRAAS app (a letter with a link to download the app is sent in a separate email).

    8. In the GRAAS app, open the GRAAS iRigator device.

    9. In the app, go to settings and press "clear system".

    10. Connect the water source and run the water.

    11. You must monitor each zone. After making sure that water is flowing through all the outlets, press "end system drain".


    GRAAS iRigator WI-FI

      The WI-FI version is suitable for greenhouses that are near the house and have a good WI-FI signal. If you choose the WI-FI version and notice that the signal in the greenhouse is not strong enough, you can later change the device version to GSM by contacting us.


      After unpacking the product, you must perform the following steps in the order indicated:


      1. Connect the product to the computer using the included USB cable.

      2. Download the GRAAS WI-FI application to your computer and open it.

      3. Enter the WI-FI access name and password and press "send".

      4. Wait until you see "connection successful" in the application window.

      5. Disconnect the device from the computer and take it to the greenhouse.

      6. Hang the device.

      7. Lay the water hoses for each zone.

      8. Punch holes in the main zone hose and connect thin hoses to each plant stem.

      9. Close the hoses on the water outlets of the device.

      10. Connect the power cable and turn on the device (The device turns on immediately, only connected to the network).

      11. Wait about 1 minute for the device to connect to the server.

      12. Open the GRAAS app.

      13. In the GRAAS app, open the GRAAS iRigator device.

      14. In the app, go to settings and press "clear system".

      15. Connect the water source and run the water.

      16. You must monitor each zone. After making sure that water is flowing through all the outlets, press "end system drain".